Keyword： The electric blanket is wet

The treatment method of an electric blanket wetted with water is as follows

Use a clean towel with good water absorption to absorb the water, and then hang the electric blanket in a cool and ventilated place to dry. Be careful not to be exposed to the sun, so as not to accelerate the aging of its internal insulation material.

However, if the drink or other liquid is spilled on the electric blanket, it needs to be cleaned first and then dried to ensure that the circuit is not damaged before use.

Therefore, it is found that the electric blanket is wet by water, and it needs to be handled according to the following steps:

(1) The part of the electric blanket that is most likely to leak electricity is the place where the leather wire and the blanket are combined. If water enters this place, it must not be used.
(2) You can take it apart carefully, dry the moisture inside with a hair dryer, and then restore it to its original shape.
(3) Finally, put the electric blanket outside to dry, and you can use it with confidence.

The following points should be paid attention to when using electric blankets:

1. Before using the electric blanket, read the instruction manual carefully and operate in strict accordance with the instruction manual.
2. The voltage and frequency of the power supply used should be consistent with the rated voltage and frequency marked on the electric blanket.
3. Electric blankets should be strictly prohibited from being folded. In the process of using the electric blanket, you should always check whether the electric blanket is piled up or pleated. If so, the wrinkles should be flattened before use.
4. Do not use electric blankets together with other heat sources.
5. If you use a preheating electric blanket, it is absolutely forbidden to use it with electricity overnight, and the user should turn off the power before going to bed.

Written by: FUJIREJA GROUP
The Exporter and Manufacturer of Heaters since 2003
Welcome OEM ODM
https://bestheatingappliance.com/