Table of contents
introduction
Does the air energy water heater have any effect if it is not cleaned?
Which part of the air energy water heater should be cleaned?
Human beings are paying more and more attention to air quality because each of us needs air. Without air, we human beings cannot survive at all.
With the advancement of technology, we not only use air to survive but also use air to make some tools. Air-energy water heaters are one of them. Air-energy water heaters are heated by air. Although air-energy water heaters are good, they need to be cleaned if they are permanent.
This article will introduce air-energy water heaters to you. If you are interested in the hazards of not cleaning, you can take a look!
No matter what kind of air-source water heater, the scale may be generated during the heating process, which will not only affect the heat preservation effect but also corrodes the water tank and shorten the life of the air-source water heater. Although air-energy water heaters are good, any electrical appliance needs maintenance in order to be used better for a long time, and air-energy water heaters are no exception.
The scale has a great impact on air energy water heaters. It not only makes the container not insulated but also consumes a lot of energy due to uneven heating during the heating process.
During the use period, you will find that the air energy heater has an obvious power-saving effect and fast heating speed in the first few years of use, but it has not been used for a few years, just like an aging machine, the heating time is getting shorter and shorter.
The longer it is, the higher the power consumption will be. But in the process of use, it is inevitable that some problems will be encountered.
The air source water heater has several parts. If you want to clean the host condenser, it is recommended to clean it every two years, and then use a descaling agent at 50°C~60°C to clean it.
If you turn on the air source water heater, you can use the circulation system that comes with the host to clean it for 3 hours, and then wash it with tap water 3 times. Everyone must remember that when cleaning, do not use corrosive cleaning fluid to clean, otherwise, the parts may be damaged. Damage may lead to problems with the use of air-energy water heaters.
1. The water filter installed in the unit should be cleaned regularly to ensure that the water quality in the system is clean, so as to avoid the unit being damaged due to the dirty filter.
2. Users should pay attention when using and maintaining the air source heat pump unit. All safety protection devices in the unit have been set before leaving the factory. Do not disassemble or adjust it by yourself.
3. Frequently check whether the power supply of the air source heat pump water heater unit and the wiring of the electrical system are firm and whether the electrical components have abnormal movements. If so, they should be repaired and replaced in time.
4. Frequently check whether the water supply of the water system, the safety valve of the water tank, the liquid level controller, and the exhaust device is working normally, so as to prevent the air from entering the system and reducing the water circulation, which will affect the heating capacity of the unit and the reliability of the unit operation.
5. Check whether the water pump and water valve are working normally and whether the water pipe and water pipe joint are leaking.
6. The surroundings of the unit should be kept clean and dry with good ventilation. Clean the heat exchanger every year to maintain a good heat exchange effect.
7. Frequently check the working conditions of each component of the unit, check whether there is oil on the pipeline joint box and the inflation valve in the unit, and ensure that there is no leakage of the refrigerant in the unit.
Written by: FUJIREJA GROUP
The Exporter and Manufacturer of Heaters since 2003
Welcome OEM ODM
https://bestheatingappliance.com/