Heated blanket

Electric blankets are common daily necessities in our lives. They are deeply loved and welcomed by people. Many people don’t know how to distinguish the front and back of electric blankets. Do electric blankets have a front and back? Can the electric blanket be laid backwards?

Do heated blankets have a front and back?

1 There are pros and cons.

Although the heating wire of the electric blanket is placed between the two layers of blankets, there is a wire switch on one side of the electric blanket, and the wire head needs to be placed on the side of the bed, and the side with the wire head switch should face up. Avoid pressing the wires during use, which will lead to poor wiring. This is also used to distinguish the front and back, so the electric blanket is the front and back. Can the electric blanket be laid backwards?

2 It is best not to lay the shop backwards.

Some heated blankets can be used on both sides, because the arrangement of the heating wires is relatively uniform, whether it is front or back, the heating effect is the same, but there are also some electric blankets that cannot be reversed. Those electric heating oils that cannot be laid backwards can also heat up, but the service life will be greatly reduced. If there is sweating, then the risk of electric leakage will increase. It is recommended to be unsure about the electric heater you buy. If the blanket can be laid backwards, it is recommended not to lay it backwards.

How to distinguish the front and back of the heated blanket

1 Pay attention to the direction of the switch and the pattern on the electric blanket

When purchasing an electric blanket, there will be an instruction manual, and the instruction manual will indicate the front and back of the electric blanket, usually with the switch button facing upwards. Patterns Most electric blankets will print patterns and patterns on the front to distinguish the front and back of the electric blanket, and the printed patterns are also the most convenient to distinguish. Which layer of the bed should the electric blanket be placed on?

2 Heated blankets were placed under the sheets

There are a lot of electric heating wires in the middle of the electric blanket. If you sleep directly, the comfort is not good, and the gravity of the body will also cause a certain squeeze on the electric blanket. If you add a layer of sheets on top of the heating blanket, then this can reduce the electric heating. The blanket is radiant while also adding cushioning. And the bed sheet can also play the role of isolation, and only need to change the bed sheet when changing and washing, and the electric blanket is an electrical appliance, it is inconvenient to clean if it is dirty, and the electric blanket can be kept clean by using the bed sheet to insulate.

In real life, some people like to lay electric blankets backwards, or they don’t care how to lay them.
,

Attention

But in the process of using, the following points should be kept in mind:

(1) Be sure to pay attention to tiling, and don’t let the electric blanket appear folded or even wrinkled.

Because once the electric blanket is folded, it will not only bend the heating wire and cause damage; but more importantly, it will easily cause local overlapping and overheating, which may cause burns.

(2) It is not recommended to directly contact the body with the electric blanket, it is better to add a layer of sheets in the middle.

Because the heat dissipation of the electric blanket is carried out through the air medium, this process is easy to make the human skin show that the water loss is serious and relatively dry.

For some people with sensitive skin, allergies may occur.

(3) Use the electric blanket correctly, it is not recommended to turn it on all night.

The correct way to use an electric blanket is:

Turn on the high-temperature gear about 1 hour before going to bed for preheating, and turn it off or adjust it to the heat preservation state when you go to bed.

Written by: FUJIREJA GROUP
The Exporter and Manufacturer of Heaters since 2003
Welcome OEM ODM
https://bestheatingappliance.com/